•
Accept the message box by pressing
key and return to weighing
mode.
<
Setting of start mass> parameter allows to adjust
start mass of platform 1.
Caution:
The factory adjustment process for platforms 2, 3, 4 is analogical to the one
described above.
22.2. Start mass adjustment
It is possible to adjust only a start mass, it helps to correct the start zero
when the span does not change.
Procedure:
•
Enter
submenu
<
User Adjustment >
according to ch. 22
and select:
“
Setting of start mass”
,
•
After entering the parameter the following message box appears:
•
Take the load off the pan of platform 1,
•
Press
button
. The following message appears during adjusting
start mass:
„Evaluation of starting mass”
,
100
