Procedure:
•
Enter parameters group
<
Working Modes>
according to ch. 24
of this manual,
•
Enter the required working mode and choose:
„
Labelling mode /
No. of CC labels”
, then the editing field
<No. of CC labels>
with the screen keyboard is opened,
•
Enter the required number of cumulative labels and confirm
by pressing
.
24.6.4. Automatic triggering of cumulative labels
Users have access to the function of automatic triggering of printing
cumulative labels after setting parameters
<
Mode>
and
<
Threshold>
.
Procedure:
•
Enter
<
Working modes>
parameter group as described
in chapter 24 of this manual,
•
Enter the required working mode and choose:
„
Labelling mode /
C label automatic triggering /
Mode”
and then set the
required option:
None
- Cumulative label printout is initiated by pressing
or
*
,
Mass
- Cumulative label printout is initiated by exceeding the
value set in parameter
<
Threshold>
.
The value
is treated as the total from single weighments,
Number
- Cumulative label printout is initiated by exceeding the
value set in parameter
<
Threshold>
.
The value
is treated as the number of single weighment.
*)
Manual printing of cumulative labels can be done in two ways
depending on the button used:
112
