•
Enter the required working mode and choose
<
Peak hold>
and then
set the required option.
Where:
- Scale operates in standard weighing mode
- Scale operates with mode forcing lock of maximum indication
on the display, i.e. peak hold.
•
On loading the weighing pan with changeable force, the displays locks
the indication of the maximum measured force. The locked value is
signalled by red colour of the displayed value.
•
Remove load from the weighing pan.
•
Before carrying out the following measurement press
button.
24.10. Information about saved measurement
The user can activate message informing on the fact that a particular
weighing result has been recorded in a database, the message is displayed
each time after performed measurement.
Procedure:
•
Enter
submenu
<
Working modes>
according to ch. 24 of this
manual,
•
Enter
„Weighing”
mode and activate option:
<
Information about
saved measurement>
,
•
Each time after completed measurement the message
<Measurement
saved>
is displayed.
Caution:
The message is displayed as long as value of <
Error information
preview time> parameter specifies (read point 21.12 of this manual).
117
