27.3. Reference unit mass estimated by weighment
Procedure:
•
Enter
<
Deviations>
according to ch. 27.1 of this manual,
•
If the standard is to be weighed in a container, the container needs
to be put on the pan and tarred,
•
Press
(Estimate standard mass), then a message is displayed:
<Put standard>
,
•
Put the load on the pan. After stabilization the result is taken
as a standard (symbol
). Confirm it by pressing
,
•
At the same time the weight unit is changed to (w %).
27.4. Reference unit mass inscribing into the memory
Procedure:
•
Enter
<
Deviations>
according to ch. 27.1 of this manual,
•
Press
(Give piece mass), then an editing field is displayed
<Give piece mass>
together with the screen keyboard,
•
Enter a value and confirm by pressing
,
•
At the same time the weight unit is changed to (w %).
28. WORKING MODES - DOSING
<
Dosing>
mode enables carrying out filling and dosing processes of
goods on scales featuring a scales of Y series. The working mode enables
manual and automatic dosing on a single or simultaneously
on many weighing platforms.
126
