Caution:
If before control start the operator:
•
Does not remove a load from the weighing pan or other criteria for
zeroing are failed (e.g. unstable weighing result) the scale displays
a message: <Unable to start control. Zeroing error>,
•
Does not log in or the logged operator is not authorized to carry out
the control, the scale displays a message: <No authorization>,
•
Does not select a product from the database, the scale displays
a message: <Product not selected >,
•
Does not declare batch quantity, the scale displays a message:
<Batch quantity not entered >.
30.6. Control aborting procedure
After control start an operator can abort the control process in an optional
moment by pressing a function hot-key
(control stop) located in the
bottom bar of the control process window.
Pressing the
(control stop) key is followed by displaying a message:
Pressing
key
causes reuniting to the control process in progress.
Pressing
key
causes terminating the control and returning to settings
of the
CPG
mode.
Simultaneously, a control report with status
<
Terminated
>
is added to the
database of
<
Controls>
.
156
