Procedure:
•
Enter
<
Communication>
parameter group as described
in chapter 16 of this manual,
•
Select:
„
Tcp /
Port”
then you will see window
<Port>
with the screen keyboard,
•
Enter the required number and press
.
Caution:
The number of TCP port in RADWAG instruments is set to default value:
4001.
15.4. Wi-Fi
15.4.1. Wi-Fi network status
In order to view selected network parameters click
<Network Status>
field.
Displayed window provides the following parameters:
Name Value
Description
Network -
Network
name
Network status
Connected
Network status with values: connected,
disconnected
RSSI
- dbm
- %
Signal strength
Forget the network
-
Disconnection from a selected network
Selected network and parameters set for connection are stored within the
scale program, each time the scale is turned on it connects to the selected
network in accordance with pre-set parameters.
15.4.2. Available networks
The user can view
<
Available networks>
detected by the scale.
52
