Procedure:
•
Enter
submenu
<
Others>
according to ch. 21 of this manual,
•
Select
<
Screen timeout>
submenu,
<Screen timeout>
editing
window with an on screen keyboard is displayed,
•
Enter required time value in [s] and press
button to confirm.
21.9. Proximity sensor
The user can specify sensitivity for proximity sensors operation (sensors
operation dependant on distance between the sensor and operator’s hand).
Procedure:
•
Enter
submenu
<
Others>
according to ch. 21 of this manual, select
<
Proximity sensor>
parameter and set appropriate option.
Where:
0
- Sensors operation disabled
1 ÷ 9
- Sensitivity values range (the higher value,
the broader sensors response range)
21.10. Logging in required
<
Logging in required>
parameter must be active if a logging operation
is to be carried out by an operator after the device have been turned on.
Procedure:
•
Enter
submenu
<
Others>
according to ch. 21 of this manual, select
<
Logging in required>
parameter and then set the appropriate
option.
Where:
- Inactive logging required
- Active logging required
96
