36. APPENDIX C – Label pattern
A label pattern can be created in 2 ways:
•
From the terminal level using variables,
•
Using PC software EDYTOR ETYKIET R01. A created project needs
to be saved as an „lb” file then copied on a pendrive that can be
connected to the terminal. Finally transfer the file to the database
in the scale.
While a label is in the database of labels it can be ascribed to products
or/and contractors in order to work in labelling mode.
36.1. Designing a label from the terminal level
Procedure:
•
Enter
<
Databases> according to ch. 27 of this manual,
•
Enter
<
Labels> and press on the required position.
•
After
entering
<
Label pattern> an editing field with the screen
keyboard appears
•
Modify the existing pattern using the list of variables accessible
after pressing
,
•
Confirm changes by pressing
.
Notice:
In the bottom line of the screen keyboard there are additional buttons that
help to modify a label pattern:
Screen keyboard on / off
Read label patterns from *.lb files (see – ch. 36.3)
Select variables for the display pattern (inventory of variables
can be found in APPENDIX A)
Clearing the editing field
120
