In order to enter <
Communication>,
press
and then
:
„
Parameters /
Communication”.
15.1. RS 232 settings
Procedure:
•
Enter
<
Communication> according to ch.15 of the manual, select
<
COM1> or <
COM2>, and then set an appropriate value.
For RS 232 following parameters are accessible:
•
Baud Rate
- 4800, 9600, 19200, 38400, 57600, 115200 bit/s
•
Data bits
- 5, 6, 7, 8
•
Stop Bit
- No, 1, 1.5, 2
•
Parity
- No – Odd – Even – Mark – Space
15.2. ETHERNET setting
Procedure:
•
Enter
<
Communication> according to ch.15 of the manual,
select <
Ethernet> and then set an appropriate value.
Following settings are accessible for Ethernet:
•
DHCP
- Yes – No
•
IP
Address
-
192.168.0.2
•
Subnet Mask - 255.255.255.0
•
Default gateway - 192.168.0.1
Notice:
The settings above are only for information purposes. Transmission
parameters should be matched to the local client network.
•
After making changes press
, then a new message is displayed:
<Restart to apply the changes>,
36
