21.2. Start mass adjustment
It is possible to adjust only a start mass, it helps to correct the start zero
when the span does not change.
Procedure:
•
Enter
submenu
<
Customer Calibration> according to ch. 21
and select: “
Platform 1 /
Setting of start mass”,
•
After entering the parameter the following message box appears:
•
Take the load off the pan of platform 1,
•
Press
button
. The following message appears during adjusting
start mass: „Evaluation of starting mass”,
•
After the procedure has been completed the following message
box appears:
•
Return to weighing, saving parameters.
62
