•
After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about 2
secunds.
•
After the stabilization process the comparator performs a measurement
in mode „Automatic first stable”. (pictogram
appears).
•
After getting the first stable result the procedure command changes
form <Put A1> to <Put B1>,
•
Unload
weight
“A” - “-----“ are shown for stabilization process,
•
The stabilization proces last about 2 minuts again, then „0” appears
on the display – the comparator is ready for weighing another weight,
•
Load
weight
“B”. on the pan and the device enters the stabilization
process showing “-----“,
•
After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about 2
sekunds.
•
After the stabilization process the comparator performs a measurement
in mode „Automatic first stable”. (pictogram
appears).
•
After getting the first stable result the procedure command changes
form <Put B1> to <Put B2>,
•
Unload
weight
“B” - “-----“ are shown for stabilization process,
•
The stabilization proces last about 2 minuts again, then „0” appears
on the display – the comparator is ready for weighing another weight,
•
Load againg standard weight “B” and the device enters the stabilization
process showing “-----“,
•
After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about
2 sekunds,
•
After the stabilization process the comparator performs a measurement
in mode „Automatic first stable”. (pictogram
appears),
•
After getting the first stable result the procedure command changes
form <Put B2> to <Put A2>,
•
Unload
weight
“B” - “-----“ are shown for stabilization process,
•
The stabilization proces stabilizacji last about 2 minuts again, then „0”
appears on the display – the comparator is ready for weighing another
weight,
83
