DefensePro User Guide
Monitoring DefensePro Devices and Interfaces
Document ID: RDWR-DP-V0602_UG1201
273
Statistics
Incoming Bytes
The number of incoming octets (bytes) through the interface
including framing characters.
Incoming Unicast Packets
The number of packets delivered by this sub-layer to a higher sub-
layer, which were not addressed to a multicast or broadcast address
at this sub-layer.
Incoming Non-Unicast
Packets
The number of packets delivered by this sub-layer to a higher sub-
layer, which were addressed to a multicast or broadcast address at
this sub-layer.
Incoming Discards
The number of inbound packets chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for discarding such a
packet could be to free up buffer space.
Incoming Errors
For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-
layer protocol. For character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained errors
preventing them from being deliverable to a higher-layer protocol.
Outgoing Bytes
The total number of octets (bytes) transmitted out of the interface,
including framing characters.
Outgoing Unicast Packets
The total number of packets that higher-level protocols requested be
transmitted, and which were not addressed to a multicast or
broadcast address at this sub-layer, including those that were
discarded or not sent.
Outgoing Non-Unicast
Packets
The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast or broadcast
address at this sub-layer, including those discarded or not sent.
Outgoing Discards
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being
transmitted. One possible reason for discarding such a packet could
be to free up buffer space.
Outgoing Errors
For packet-oriented interfaces, the number of outbound packets that
could not be transmitted because of errors. For character-oriented or
fixed-length interfaces, the number of outbound transmission units
that could not be transmitted because of errors.
Table 127: L2 Interface Statistics
Parameter
Description
Summary of Contents for DefensePro 6.02
