manualshive.com logo in svg

Radware DefensePro 6.02, User Manual

User manual for Radware DefensePro 6.02, a robust cybersecurity solution, can be downloaded for free from our website. This comprehensive manual provides detailed instructions on configuring and optimizing the product to ensure maximum network protection against sophisticated cyber threats.

Share
Download
background image

 

DefensePro User Guide

Document ID: RDWR-DP-V0602_UG1201

 

5

Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and 

the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions 

and the following disclaimer in the documentation and/or other materials provided with the 
distribution.

ALL THE SOFTWARE MENTIONED ABOVE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY EXPRESS 
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice traitant du copyright

Ce produit renferme des codes développés dans le cadre du projet OpenSSL.
Ce produit inclut un logiciel développé dans le cadre du projet OpenSSL. Pour un usage dans la boîte 
à outils OpenSSL (http://www.openssl.org/).
Copyright (c) 1998-2005 Le projet OpenSSL. Tous droits réservés. Ce produit inclut la catégorie de 
chiffre Rijndael. 
L'implémentation de Rijindael par Vincent Rijmen, Antoon Bosselaers et Paulo Barreto est du 
domaine public et distribuée sous les termes de la licence suivante :
@version 3.0 (Décembre 2000)
Code ANSI C code pour Rijndael (actuellement AES)
@author Vincent Rijmen <vincent.rijmen@esat.kuleuven.ac.be>
@author Antoon Bosselaers <antoon.bosselaers@esat.kuleuven.ac.be>
@author Paulo Barreto <paulo.barreto@terra.com.br>.
Le commutateur OnDemand peut utiliser les composants logiciels sous licence, en vertu des termes 
de la licence GNU General Public License Agreement Version 2 (GPL v.2), y compris les projets à 
source ouverte LinuxBios et Filo. Le code source de LinuxBios et Filo est disponible sur demande 
auprès de Radware. Une copie de la licence est répertoriée sur:

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

Ce code est également placé dans le domaine public.
Ce produit renferme des codes développés dans le cadre du projet OpenSSL.
Copyright (c) 1983, 1990, 1992, 1993, 1995
Les membres du conseil de l'Université de Californie. Tous droits réservés.
La distribution et l'usage sous une forme source et binaire, avec ou sans modifications, est autorisée 
pour autant que les conditions suivantes soient remplies :
1. La distribution d'un code source doit inclure la notice de copyright mentionnée ci-dessus, cette 

liste de conditions et l'avis de non-responsabilité suivant.

2. La distribution, sous une forme binaire, doit reproduire dans la documentation et/ou dans tout 

autre matériel fourni la notice de copyright mentionnée ci-dessus, cette liste de conditions et 
l'avis de non-responsabilité suivant.

3. Le nom de l'université, ainsi que le nom des contributeurs ne seront en aucun cas utilisés pour 

approuver ou promouvoir un produit dérivé de ce programme sans l'obtention préalable d'une 
autorisation écrite.

Ce produit inclut un logiciel développé par Markus Friedl 

Summary of Contents for DefensePro 6.02




















































































































































































































































































































































Reviews:

No comments

Related manuals for DefensePro 6.02

Draytek VigorPro 5510 Series User Manual preview
VigorPro 5510 Series
Brand: Draytek Pages: 316
Fortinet FortiBridge 1000 Installation Manual preview
FortiBridge 1000
Brand: Fortinet Pages: 56
Check Point M2 Brochure & Specs preview
M2
Brand: Check Point Pages: 4
Fujitsu MB91401 Datasheet preview
MB91401
Brand: Fujitsu Pages: 72
ZyXEL Communications ZyWALL USG Series Reference Manual preview
ZyWALL USG Series
Brand: ZyXEL Communications Pages: 426
PaloAlto Networks PA-200 Quick Start preview
PA-200
Brand: PaloAlto Networks Pages: 2

Brands by name

Popular brands

Load more brands