DefensePro User Guide
Basic Device Configuration
100
Document ID: RDWR-DP-V0602_UG1201
Configuring Device Users
For each DefensePro device, you can create a list of users who are authorized to access that device
through any enabled access method (Web, Telnet, SSH, SWBM). When configuration tracing is
enabled, users can receive e-mail notifications of changes made to the device.
To configure device users for a selected device
1. In the Configuration perspective Device Security tab navigation pane, select Users Table.
2. Do one of the following:
—
To add a user, click the
(Add) button.
—
To edit an entry, double-click the row.
3. Configure device user parameters and click OK.
Table 41: SNMP Target Address Parameters
Parameter
Description
Name
Name of the target address entry.
IP Address and L4 Port
[IP-port number]
The IP address of the management station (APSolute Vision server)
and TCP port to be used as the target of SNMP traps. The format of the
values is
<IP address >-<TCP port>
, where
<TCP port>
must be
162. For example, if the value for IP Address and L4 Port is 1.2.3.4-
162, 1.2.3.4 is the IP address of the APSolute Vision server and 162 is
the port number for SNMP traps.
Note:
APSolute Vision listens for traps only on port 162.
Mask
A subnet mask of the management station.
Tag List
Specifies sets of target addresses. Tags are separated by spaces. The
tags contained in the list may be either tags from the Notify table or
Transport tags from the Community table.
Each tag can appear in more than one tag list. When a significant event
occurs on the network device, the tag list identifies the targets to which
a notification is sent.
Default: v3Traps
Target Parameters Name
The set of target parameters to be used when sending SNMP Traps.
Target parameters are defined in the Target Parameters table.
Table 42: Device User Parameters
Parameter
Description
User Name
The name of the user.
Password
Enter the password of the user, then repeat to verify.
Email Address
The e-mail address of the user to which notifications will be sent.
Summary of Contents for DefensePro 6.02
