Setting the Clock Configuration
WinLink User and Installation Guide
Version 1.750
3-53
link. The user equipment must be configured as described in the
following table.
Table
3-2: TDM Clock Modes
Unit Clock Mode
User Equipment Side
Local Unit
Remote Unit
HQ side
Branch side
1 Transparent Transparent
Internal/Recover Internal/Recover
2 Loop
Time
Recover
Internal
Recover
3 Recover
Loop
Time Recover
Internal
4 Internal
Recover
Recover
Recover
5 Recover
Internal
Recover
Recover
Transparent/Transparent
WinLink transparently regenerates the clock from line clock
side to Tx clock on the opposite side of the link.
Loop time/Recover
The local unit receive clock is the transmit clock on both sides
of the link.
Recover/Loop time
The remote unit receive clock is the transmit clock on both
sides.
Internal/Recover
The local unit internal oscillator generates the clock while the
remote unit recovers this clock.
Recover/Internal
The remote unit internal oscillator generates the clock while
the local unit recovers this clock.
8.
Note:
The Line code option is used with T1 Systems.
