External Antenna Package Contents
Chapter 3
RADWIN 1000/2000/5000 User ManualVersion 2.5.30p3
3-5
External Antenna Package Contents
• Antenna
• RF cable 1m (3’) long; two cables supplied with bipolar antennas,
single cable supplied with monopolar antennas
• Mounting kit
Additional Tools and Materials Required
The following is a list of the equipment and materials required to install
RADWIN 1000/2000/5000 hardware.
Tools and Materials
• Crimping tool for RJ-45 (if the ODU-IDU cable is without connectors)
• Spanner/wrench 13 mm (½”)
• Drill (for wall mounting only)
• Cable ties
• Sealing material
Cables and connectors
• ODU grounding cable 12AWG
• IDU grounding cable 18AWG
• ODU-IDU cable (outdoor class, CAT-5e, 4 twisted pairs, 24AWG)
Hardware Installation Sequence
The following steps are required to install the RADWIN 1000/2000/5000
system:
1. Mounting the ODUs, page
2. Mounting the external antennas (if used), page
.
3. Mounting the Lightning Protection devices (if used), page
4. Outdoor connections, page
.
6. Indoor connections, page
7. Aligning the ODUs/antennas, page
See
below, which illustrates a typical installation of RADWIN
1000/2000/5000 with an external antenna.