PROGRAMMING THE AREARAE
4-18
4.5 Change Alarm Limits
You may change each sensor’s alarm limits while in Program
Mode.
These are the submenus for changing the alarm limits:
Change High Alarm limit?
Change Low Alarm limit?
Change STEL alarm limit?
Change Average alarm limit?
5. The items in the submenu allow changing the high alarm
limit, low alarm limit, STEL alarm limit, or average alarm
limit. The average alarm limit can be “Running Average” or
“TWA (Time Weighted Average) depending on the menu
selection on “Change Averaging Method” (see Section
4.7.8). Press [N/-] to cycle through the submenu. Press
[Y/+] to enter a submenu and the display shows “HIGH”,
“LOW,” “STEL,” “TWA,” or “AVG” with a flashing cursor on
the left-most digit of the previously stored alarm limits.
TOX1
VOC
TOX2
200
100.0
20
20 HIGH
23.5
LEL
OXY
TOX1
VOC
Gamma
200
100.0
250
20 HIGH
23.5
LEL
OXY
AreaRAE
AreaRAE Gamma
TOX1
VOC
TOX2
35
50.0
10
10 LOW
23.5
LEL
OXY
TOX1
VOC
Gamma
35
50.0
100
10 LOW
23.5
LEL
OXY
AreaRAE
AreaRAE Gamma
TOX1
VOC
TOX2
100
25.0
15
STEL
LEL
OXY
TOX1
VOC
Gamma
100
25.0
STEL
LEL
OXY
AreaRAE
AreaRAE Gamma