PROGRAMMING THE AREARAE
4-19
TOX1
VOC
TOX2
35
10.0
10
TWA
LEL
OXY
TOX1
VOC
Gamma
35
10.0
TWA
LEL
OXY
AreaRAE
AreaRAE Gamma
Alternatively, if the Averaging Method is the Running
Average, the AVG is displayed instead of the TWA. (See
Section 4.7.9: Change Averaging Method.)
TOX1
VOC
TOX2
1.0
10.0
10
AVG
LEL
OXY
TOX1
VOC
Gamma
1.0
10.0
AVG
LEL
OXY
AreaRAE
AreaRAE Gamma
2. To modify this limit, starting from the left-most digit, use
[Y/+] or [N/-] to change the digit value, and press [MODE]
momentarily to advance to the next digit. The flashing digit
moves on to the next digit to its right. Repeat this process
until all the new alarm limits are entered. Press and hold
[MODE] for 1 second to exit data entry mode. If there is
any change to the existing value, the display shows
“Save?” Press [Y/+] to accept the new value and move to
the next submenu. Press the [N/-] to discard the changes.
To preserve the previously stored alarm limit, press and
hold [MODE] for 1 second and the monitor exits data entry
mode and moves to the next submenu.