PROGRAMMING OF IAQRAE
4-4
7. If the entered password is correct, the monitor enters the
programming menu. The first menu item “Calibrate
Monitor?” will display.
8. If the password is incorrect, the display shows “Wrong
Password???” and returns to the regular display of
instantaneous gas readings.
9. If the monitor user operation is set to Basic level, Security
Level 0, the message “Display Only! Cannot enter....” will
appear.
To Exit
1. Press [MODE] once.
2. The display will show an instantaneous reading for normal
operation.
3. To exit Programming Mode from most submenus, press
[MODE] twice. In some cases it is necessary to first
acknowledge a “save?” or “OK?” display by using [MODE]
to move to that query and then [Y/+] to accept.
4. To return to Programming Mode, press and hold [MODE]
and [N/-] at the same time for 3 seconds.
