PROGRAMMING OF IAQRAE
4-23
4.5.1 Change Site ID
The user may enter an eight-character site ID, which will be
included in the datalog report.
1. At the “Change Site ID?” screen, press [Y/+] and the
display will have the current site ID: “Site ID = xxxxxxxx”.
Press [MODE] to move the cursor to the left-most digit.
2. Press [Y/+] or [N/-] to cycle through all 26 letters and 10
numerals. Hold down [Y/+] or [N/-] for rapid scrolling. Press
[MODE] to advance to the next digit on the right. Repeat
until all 8 digits have been entered.
3. Press [MODE] to move the cursor to “Save?” Press [Y/+]
to accept the new site ID and exit the submenu. Press [N/-]
to discard changes and advance to the next submenu.
