MultiRAE
User’s Guide
11
3.1.2 Keys And Interface
The MultiRAE has three keys:
Y/+
MODE
N/-
In addition to their labeled functions, [Y/+], [MODE], and [N/-] act as “soft keys” that control different
parameters and make different selections within the instrument’s menus. From menu to menu, each key
controls a different parameter or makes a different selection.
Three panes along the bottom of the display are “mapped” to the keys. These change as menus change,
but at all times the left pane corresponds to the [Y/+] key, the center pane corresponds to the [MODE]
key, and the right pane corresponds to the [N/-] key. Here are examples that show the relationships of the
keys and functions:
In addition to the functions described above, any of the keys can be used to manually activate display
backlighting. Press any key when the backlighting is off to turn it on. A subsequent key press is required
to carry out an actual function corresponding to that key.
3.1.3 LCD Flip
The MultiRAE senses its vertical/horizontal orientation, and can automatically flip the display 180
degrees, making it easy to read if the MultiRAE is upside down. (You can turn this feature on or off in
Programming Mode, under “Monitor/LCD Flip.”)
As the MultiRAE is tilted, the gravity sensor
detects its orientation and inverts the screen
when it is past its horizontal position.
Summary of Contents for MultiRAE
Page 1: ...MultiRAE User s Guide Rev D December 2013 P N M01 4003 000 ...
Page 92: ......
