MultiRAE
User’s Guide
44
8.3.6.2
PAN ID
The MultiRAE and any other devices that you want to interconnect wirelessly must have the same PAN
ID.
1.
Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2.
After moving to the last digit and making changes, press [MODE].
Press [Y/+] to save the change.
Press [N/-] to undo the change.
8.3.6.3
Channel
The MultiRAE and any other devices that you want to interconnect wirelessly must be operating on the
same channel.
1.
Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2.
After moving to the last digit and making changes, press [MODE].
Press [Y/+] to save the change.
Press [N/-] to undo the change.
8.3.6.4
Join Network
You can tell the MultiRAE to automatically join a network with a certain PAN ID without having to
specify the communications channel. The PAN ID is shown for reference (if it is incorrect, you can
change it, as described above). Press [Y/+] to join.
Summary of Contents for MultiRAE
Page 1: ...MultiRAE User s Guide Rev D December 2013 P N M01 4003 000 ...
Page 92: ......
