background image

MultiRAE 

User’s Guide 

SPECIAL CONDITIONS FOR SAFE USE 

 

1.

 

The PGM-62xx shall only be fitted with RAE Systems Battery Pack type M01-3051-000 or 
M01-3053-000 or Battery Adapter M01-3052-000 or M01-3054-000 fitted with Duracell 
MN1500 batteries. 

2.

 

The PGM62xx shall only be charged outside hazardous areas. 

3.

 

No precautions against electrostatic discharge are necessary for portable equipment that has 
an enclosure made of plastic, metal, or a combination of the two, except where a significant 
static-generating mechanism has been identified. Activities such as placing the item in a 
pocket or on a belt, operating a keypad or cleaning with a damp cloth, do not present a 
significant electrostatic risk. However, where a static-generating mechanism is identified, 
such as repeated brushing against clothing, then suitable precautions shall be taken, e.g., the 
use of anti-static footwear. 

 

The model PGM62xx is certified according to the IECEx scheme, ATEX and cCSAus (for US and 
Canada).  PGM62xx is intrinsically safe and may be used in hazardous locations.  SUBSTITUTION OF 
COMPONENTS MAY IMPAIR INTRINSIC SAFETY. 
 

MARKING 

 
The product is marked with the following information: 
 
RAE SYSTEMS 
3775 N. 1

st

. St., San Jose 

CA 95134, USA 
 
Type PGM62x0, PGM 62x6, PGM 62x8 
Serial No/matrix: XXX-XXXX-000 

 

IECEx SIR 11.0069X, 
Ex ia IIC T4 Ga 
(PGM62x0/PGM62x6) 

Ex ia d IIC T4 Gb 
(PGM62x8) 

 

0575

 

SIRA 11ATEX2152X 

II  1G Ex ia IIC T4 Ga  

(PGM62x0/PGM62x6) 

 

 II  2G Ex ia d IIC T4 Gb  

(PGM62x8)

 

 Exia

 

Cl I, Dv 1  

Gr. A, B, C, D, T4  
C22.2 No 152-1984 
ISA-12.13.01-2000 

 

 

Warnings:

 Understand manual first before operating. 

Warning:

  Do not change batteries in hazardous location. 

Do not mix old/new or different type of batteries 

 

PGM62x0: 

Use only RAE Systems battery pack, PN: M01-3051-000 or M01-3052-000.

 

PGM62x6/62x8: 

Use only RAE Systems battery pack, PN: M01-3053-000 or M01-3054-000. 

Um:

 20V 

-20º C ≤ Tamb ≤ +50º C 

 

FCC Part 15 Statement

 

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

 

 

 

Summary of Contents for MultiRAE






























































































Reviews: