RAELink3 User’s Guide
15
Troubleshooting
Problem
Possible Reasons & Solutions
Cannot turn on power
after charging the
battery
Charge or replace battery.
Remote unit not
communicating with
Host Controller
Confirm RAELink3 is in Remote mode
Check the Network ID
Check battery charge on the Remote unit
Make sure you have a unique Unit ID on
each RAELink3 or device connected to a
RAELink3.
Check the cable or Bluetooth connection
between the RAELink3 and the remote
device
Device does not link
with RAELink3 via
Bluetooth.
Make sure device’s Bluetooth is turned on.
Make sure the RAELink3 is in Bluetooth
search mode.
If this is the first time connecting, allow
time to link.
RAELink3 is not
picking up satellites to
load a map in ProRAE
Remote.
Make sure GPS is turned on.
Make sure the RAELink3 has unobstructed
view of the sky.
35