ToxiRAE Pro User’s Guide
29
Datalog Type
The instrument has two datalog types:
Auto
Collects datalog information when the instrument is sampling until the
datalog memory is full.
Manual
Datalogging occurs only when you manually initiate datalogging (see
below for details).
1.
Press [MODE] to step from one option to the next.
2.
Press [Y/+] to make your selection (the dark circle in the “radio button” indicates
that an option has been selected).
3.
When you have completed your selection, press [MODE] until “Exit” is
highlighted.
4.
Press [Y/+] to save your selection and exit.
About Manual Datalog
When the instrument is set to Manual Datalog, you can turn datalogging on and off from
the main measurement display in the Normal Mode by pressing the [MODE] key three
times.
•
When you reach the screen that says “Start Datalog?” press [Y/+] to start it. You
see “Datalog Started,” confirming that datalogging is now on.
•
When you reach the screen that says “Stop Datalog?” press [Y/+] to stop it. You
see “Datalog Stopped,” confirming that datalogging is now off.
Exit (the Datalog Submenu)
Press [Y/+] to exit. Datalog is exited, and Monitor Setup is highlighted.
