PROGRAMMING
4 - 9
4.4.3 Modify Span Value
This function allows the user to change the span value of the
standard calibration gas.
Figure 4-2 Modify Span Value
The cursor blinks at the first digit of the span value. Use the
[Y/+]
or
[N/-]
key to modify the digit at the cursor position.
Press the
[MODE]
key momentarily to advance the cursor to
the next digit.
When the number is adjusted to the desired value, press and
hold the
[MODE]
key for one second. The user will next be
asked to confirm the change (save?).
0005.0