PROGRAMMING
4 - 10
4.5 Change Alarm Limits
In this menu, the user can change the high and low alarm limits
for each RAE-SEP tube.
Alarm Limit Sub-Menu
High limit?
Low limit?
4.5.1 Change High Alarm Limit
1. The first sub-menu item allows the user to change the High
Alarm limit. Press the
[Y/+]
key. The monitor will identify
the inserted tube and display the tube name. If the tube
cannot be identified, the tube can be manually selected by
responding with
[N/-]
until the correct tube name is
displayed. Next press the
[Y/+]
key and the display will
show a flashing cursor on the left-most digit of the
previously stored High alarm limit.
Figure 4-3 Change Alarm Limits
2. To modify this limit, starting from the left-most digit, use
the
[Y/+]
or
[N/-]
key to change the digit value and press the
[MODE]
key momentarily to advance to the next digit. The
0010.0
