PROGRAMMING
4 - 22
4.7.5 Change Time
1. “Change Time?”
2. Press
[Y/+]
key, the display shows both the current date and
time: “Time = hh : mm” with the left most digit of the time
flashing.
3. To modify this value, use the
[Y/+]
or
[N/-]
key to change
the digit value and press the
[MODE]
key momentarily to
advance to the next digit. The flashing digit will move on to
next digit to its right. Repeat this process until the new date
and time values are entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode.
4. If there is any change to the existing value, the display
shows “Save?” Press the
[Y/+]
key to accept the new value
and move to next sub-menu. Press the
[N/-]
key to discard
the changes and move to next sub-menu.
