COMPUTER INTERFACE
5 - 7
5.4 Setup
Communication
Port
It is necessary to setup the communication port on the ProRAE-
Suite software so that the UltraRAE monitor can communicate
with the PC correctly. Figure 5-4 shows the
Setup Port
dialog
box. Choose the appropriate port according to the PC’s serial
port setup.
Figure 5-4 Setup Port Dialog
Note:
In most PC's, there are two serial ports. Make sure that
the serial port selected in the
Setup Port
dialog box matches the
actual serial port connected to the UltraRAE monitor. The
default serial port for ProRAE-Suite is COM1. If the incorrect
serial port is selected, an error message of “error occur during
serial port initialization” will appear when a user tries to
communicate between the PC and the UltraRAE monitor.
