PROGRAMMING OF VRAE
4 - 22
4.6.1 Reset Peak and Minimum
This function will reset peak and minimum data stored in the
data memory.
1. “Reset Peak and Minimum?” is the first sub-menu item
in Table 4.5.
2. Press the
[Y/+]
key to clear the peak and minimum data
memory. Display shows “Are You Sure?” to re-confirm
whether to reset peak and minimum data.
3. Press the
[Y/+]
key again will reset peak and minimum
data.
4. Press the
[N/-]
or
[MODE]
key to exit without resetting
the data and move to next datalog sub-menu.
Note: STEL and TWA (or AVG) value will not be affected
when peak and minimum values are reset.
