Duonet User Instructions
11
Sound Alarms
To sound the alarms at any time after they have been silenced, proceed as follows:
1.
Press
’SOUND ALARMS’
The alarm sounders will activate. The buzzer and the
fire indication lights will also switch on.
Silence Buzzer
To silence the buzzer press the
[SILENCE BUZZER]
button at access level two as above .
1.
Press
’SILENCE BUZZER’
The fault buzzer will be silenced.
Exit Access Level 2A (User) or Access Level 2B (Supervisor)
In order to prevent unauthorised access to the system, return to Access Level 1 (Normal). However,
if left untouched the display will time out after a short while and return automatically to Access Level 1
(Normal).
1.
Turn the key
OFF
if it is turned on.
Or;
Press
‘ESC’
until the system
shows
NORM
in the top right hand
corner.
The ‘CONTROLS ENABLED’ light will switch off and
the controls are disabled.
NORM
is displayed in the top right hand corner.
Summary of Contents for duonet
