7
9
8
6
10
12
11
13
15
14
Eventually, the rail is fully secured
within the inner and outer brace.
Note that the rail should be fitted
within the contour line of the outer
brace(indicated by red line) and the
other side of rail should be firmly
against inner brace.
Install the knobs then tighten
them in an anti-clockwise way.
This diagram illustrated correct
installation of front part of bike
carrier on front roof bar.
Double check all knobs and if any
knob is loosened, re-tighten it.
This diagram illustrated correct
installation of bike carrier on roof
bars.
Before mounting bicycle, loosen
the knob located inside the tire
holder by turning anti-clockwise.
Now the tire holder moves freely.
Remove the front tire from the
bicycle, mount the fork mount onto
the 9mm skewer.
Rear tire of bicycle sits on the
wheel tray and wheel holder.
Tighten the nut of 9mm skewer.
ITEM:BC-219
NAME:Roof mounted bike carrier
