background image

the features of the LightWave before opera�ng. Failure to operate this product

correctly can result in damage to the product or personal property, and even cause

serious injury.

mechanic

al ability 

to corr

ectly ope

rate this product.  

F

ailure to operate in a safe and 

responsible manner could result in injur

y or dama

ge to the product or other prop-

ert

y

.  This product is not intended for use b

y child

ren without direct adult supervi-

manner that does not endanger 

y

ourself and others or result in damage to the product 

or propert

y

.

• 

• 

Never operate 

y

our boat while standing in water.

• 

Never operate 

y

our boat in the presence of swimmers.

• 

 

 

working on or around these parts.

• 

 

 

contact with is or serious injur

could result.

• 

• 

 

 

or injur

y

.  This boat is controlled b

y a 

radio signal that is subject to interference  

 

from man

y outside sou

rces and could result in a momentar

y loss of 

control.

• 

 

 

protected for this purpose.  Moisture can damage unprotected electronics.

• 

Make sure to keep all chemicals, small parts, and an

y

thing electrical out of the  

 

reach of children.

4

Rage RC.

Summary of Contents for LightWave

















Reviews: