-6-
CHARGING AND BATTERY INSTALLATION
CHARGING
TRANSMITTER CHARGING
USB
Micro
USB
The red light will remain on while charging. When battery is fully charged the red light will go out.
The charging time is about 3 hours
.
Note: Please use the factory charge cord. It is NOT recommended to use a damaged or other
branded cord for charging.
①
②
③
1. Hold the end of the battery cartridge
at the indentation and pull out of the
compartment.
(figure 1)
2. Connect the original charge
cord Micro USB to the flight
battery.
(figure 2)
3. Plug the USB into a 5V USB
power source.
(figure 3)
The transmitter includes a built-in 3.7V lithium
battery. To charge, connect the micro USB to the
transmitter and the USB to a 5V power source.
The charge light will be on during charging and
will go off when charging is complete. The charge
time should be approximately 3 hours.
Micro USB
USB