Connect to the computer host through USB or eSATA, and turn on the power.
(Instruction will be presented in the following graphs)
Turn on the switch of RAID0, LED would keep bright, and the host would be
entering the RAID1 active status.
Turn on the switch of RAID1, RAID1 LED would keep bright, and the host would be
entering the RAID1 active status.
Turn on the switch of JBOD, JBOD LED would keep bright, and the host would be
entering the JBOD active status.
Turn on the switch of BIG, BIG LED would keep bright, the host would be entering
the BIG active status.
Hard disk LED"/"sends blue light and has long-lasting lightening, which indicates
the hard disk connection is correct.
Hard disk LED"/"sends the pink light and does not stop glittering, which indicates
the hard disk performing wrong data transmission.
Hard disk LED"/"sends red light and does not stop glittering, which indicates the
hard disk connecting error.
If you select the USB port connection to a computer host, USB LED will keep
glittering during the data transmission.
If you select the eSATA port connection to a computer, eSATA LED will keep
glittering during the data transmission.
to AC90-240V
USB Port to PC host
eSATA Port to PC host
E-SATA
USB
AC 90V-240V
4
Connect to the computer host through USB or eSATA, and turn on the power
(Instruction will be presented in the following graph)
