19
RAIDER POWER TOOLS
4. Include high pressure cleaner.
4.1. Operation of high pressure cleaner is recommended to keep the spray gun with one
hand and trumpet with his other hand. Holding with both hands provides stability. Possible
recoil of the gun is spraying at inclusion and at work.
4.2. During operation the machine should be horizontal.
4.3. Do not place the machine in the tall grass!
4.4. Do not cover the machine at work and do not use in confined spaces without adequate
ventilation!
4.5. Inclusion.
4.6. Make sure that the main starting switch (1) is in position «0» (off).
4.7. Insert the plug of the power cord into the outlet. Open the tap water.
4.8. Unblock the handle guard against accidental release to include the trigger. Press
the shutter all the way until all the air out of the machine and hoses and begin to deliver a
constant stream of water. After venting release trigger. Unblocking press a button.
4.9. Plug the trigger switch (1). Head tube (8) of the spray gun (10) down. Unblocking
button press the handle of the gun to release the trigger. Press the shutter completely.
4.10. Adjust the water flow by turning the nozzle. Figure (i).
4.11. Perform the washing intended.
4.12. High pressure cleaner protect against overload. Should be activated by overload
protective circuit should stop work and turn off high pressure cleaner. Wait a few minutes
until cool high pressure cleaner and only then resume work.
4.13. Automatic stop function. When the trigger of the pistol grip is released, electric motor
stops. While high pressure is released, thereby increasing the durability of the machine and
reduces the cost of energy.
5. Exclude high pressure cleaner.
5.1. Release the trigger. Unblocking press a button. This spray gun is secured against
inadvertent inclusion. Turn off trigger switch (1). Close the water valve and remove plug
from outlet.
5.2. In this situation the machine and hoses remain under pressure. To release the
pressure continue to exclude the following actions. Unblocking press button to release the
trigger. Press the shutter all the way until the water pressure drops in the machine. Release
the trigger. Unblocking press a button. Disconnect water hoses from the machine and the
water supply network.
5.3. For prolonged stay of high pressure cleaner and hoses should be drained and the
water high pressure cleaner to return in a dry place at temperatures above 5 ° C.
5.4. Do not bend hose, high pressure!
5.5. The security lapse in freezing the machine!
6. Maintenance.
WARNING! Always unplug the plug from the wall outlet before taking actions relating to
maintenance or cleaning.
Summary of Contents for 123201
