3
e.
Specifications Table
ITEM
RAIDER 50 HP TLDI
Overall length
1120 mm (44.1 in.)
Overall width
384 mm (15.1 in.)
Overall height
1514 mm (59.6 in.)
Weight
92.0 kg (202 lbs.)
– w/o composites
Transom length
530 mm (20.9 in.)
Engine type
2-Stroke Direct Injection
Piston Displacement
697 ml (42.5 cu. In.)
Bore and Stroke
68 mm (2.68 in.) x 64 mm (2.52 in.)
Number of cylinders
3
W.O.T.
5150
– 5850 rpm
Trolling
700/800/900 rpm
– 3 stages available
Idling
700/800/900 rpm - 3 stages available
Full throttle fuel consumption (approximate-
ly)
17 L/Hr (4.5 US gal/Hr) varies per fuel selec-
tion
Starting System
Pull Start; rope backup (electric start availa-
ble with battery under cowl)
Intake System
Reed Valve
Scavenging system
5-port loop Charge
Exhaust system
Through hub
Lubrication system
Oil injection
Cooling system
Water-cooling
Water temperature control
Thermostat (with pressure relief valve)
Ignition System
Inductive
Ignition timing control
Electronics Control Unit (ECU)
Firing Order
1-2-3
Spark Plug
NGK: PZFR6H
Alternator
12V 280W (Maximum)
Battery
Not required
–optional (lightweight lithium iron
phosphate battery under cowl)
Trim Angle
4-24 degrees
Trim Angle settings
6 degrees
Maximum tilt-up angle
75 degrees
Transom board thickness
31-70 mm (1.22
– 2.76 in.)
Maximum steering angle
80 degrees
Gear shift
Dog clutch (F-N-R)
Gear ratio
1:85 (13 : 24)
Throttle Control
Tiller Handle
Fuel Tank
Furnished by customer
– normal fitting
Oil Tank
2L (2.1US qt.)
Fuel
JP5/8/diesel/kerosene/fuel
Engine Oil
Genuine MD Gold or Equivalent
Gear Oil
API GL5, SAE#80 to #90 500 ml (16.89 fl.
Oz.)
Submersibility
66 ft/18 hours; 50 ft./24 hours
Handling/grab rails
Attached
– fits through submarine hatch
