39
UNPACKING
X
Carefully inspect all parts after unpacking the product from the box.
X
Do not dispose of packaging materials until they have been carefully inspected for packaging.
X
Parts of the packaging (plastic bags, paper clips, etc.) cannot be kept out of reach of children, could be a
source of danger. There is a risk of ingestion or suffocation!
X
If you notice any transport damage while unpacking, notify your supplier immediately. Do not operate the
product!
X
We recommend that you save the package for future reference. However, packaging materials must be
recycled or disposed of in accordance with relevant legislation. Sort the different parts of the pack according
to the material and hand it over to the appropriate collection points. Contact your local authority for more
information.
PACKAGE CONTENTS:
X
1 x machine body, 2 x wheel, 1 x handlebar support, 1 x handle, 1 x cutter, 1 x cutting tool guard, 2 x pin,
1 x instruction manual
X
Standard accessories are subject to change without notice.
X
This product requires installation. The product must be assembled correctly before use.
X
The product produces an electromagnetic field of very low intensity. This field may interfere some pacemakers.
To reduce the risk of serious or fatal injury, people with pacemakers should consult the doctor and the manufacturer.
BEFORE STARTING THE ENGINE
FUEL
X
Due to transport, the machine is delivered without engine oil and fuel. For the same reason, some types of machinery
are also not filled with transmission oil. Fill with oil and fuel before commissioning!
THE ENGINE IS CERTIFIED FOR OIL GASOLINE - NATURAL 95 (SUPER 95).
X
Use commercial grade clean, fresh, unleaded fuel;
X
The machine is equipped with a four-stroke engine and should run exclusively on pure petrol without oil!
X
Gasoline is highly flammable and explosive, as is its vapor. You can be seriously burned or injured when refueling.
REFUELING
1. Turn off the engine. Never remove the fuel cap or add fuel when the engine is running or hot. After stopping the
engine, wait until the engine and exhaust components have cooled completely.
2. Remove the fuel tank cap (Fig. 7A).
3. Fill gasoline to a maximum of 1 cm below the lower edge of the neck.
4. Don‘t overfill! Wipe off spilled gasoline before starting the engine.
5. Replace and tighten the fuel tank caps and caps.
NEVER LOAD GASOLINE IN A ROOM.
DO NOT SMOKE OR USE AN OPEN FLAME DURING CHARGING.
MAKE SURE YOU ARE AWAY FROM HEAT, SPARKS AND FLAMES.
X
If gasoline spills, do not start the engine. Clean spilled gas immediately.
X
Move the machine out of the gasoline spill area and wait for the fuel vapor to dissipate to avoid the
possibility of fire.
X
Do not use gasoline containing ethanol. Do not mix oil with gasoline. For engine protection, we recommend
that you use the fuel stabilizer available at service stations.
Summary of Contents for GARDEN TOOLS RD-SBM01
