42
www.raider.bg
SWITCHING ON THE BLADES
1. The cutting tool may not move if the clutch lever (Fig. 15A) is released.
2. The clutch lever can only be actuated after the safety lock is activated (FIG. 15B).
3. When activated, the cutting tool must start working and stop when released.
4. Operate the clutch lever (Fig. 15A) for the cutting mechanism slowly to the stop.
5. Hold the clutch lever firmly during operation.
Do not touch moving knives.
Keep your hands and feet away from moving parts.
MANAGEMENT CONTROL
1. Hold the self-propelled control handle (Fig. 16A), the mower will move forward automatically.
2. Release the control handle until the mower goes forward.
MOWING
1. Start the engine.
2. Use the throttle to adjust the engine to the desired speed.
3. Press and hold down the clutch lever for the cutting tool.
4. Press and hold the self-control knob.
5. Turn off the engine after work is complete
MOWING INFORMATION
Make sure that the corresponding engine vents are not clogged with cut material as the engine may not cool sufficiently.
Clean the lawn from debris. Make sure the grass is clear of stones, sticks, wire, or other foreign objects that can be
accidentally thrown from the mower. This can cause serious injury to the operator and other persons, as well as damage
to property and objects.
Handle the product at the same slow speed (walking speed) in the correct order.
When working on slopes, always work on slopes, not up and down when possible.
Do not cut damp grass.
Lightly overlap when mowing to give an even look.
IF YOU HIT A FOREIGN OBJECT, STOP THE ENGINE. DISCONNECT THE SPARK PLUG CABLE,
CAREFULLY CHECK THE MOWER FOR ANY DAMAGE AND REMOVE THE DAMAGE BEFORE
RESTARTING AND OPERATING THE MOWER. THE EXTENSIVE VIBRATION OF THE MOWER DURING
OPERATION IS AN INDICATION OF DAMAGE. THE MOWER MUST BE CHECKED AND REPAIRED
IMMEDIATELY. CONTACT AN AUTHORIZED SERVICE CENTER.
TO STOP THE ENGINE
RISK OF INJURY!
Always switch off the product when not in use for short periods.
1. Set throttle lever to „e STOP“ position.
2. Disconnect and ground the spark plug cable to prevent the mower from accidentally running if left unattended for an
extended period of time.
THE KNIVES ARE EXTREMELY SHARP. TO AVOID SERIOUS INJURY:
KEEP THE PLASTIC GUARD ON THE CUTTING BAR WHEN THE MACHINE IS NOT WORKING. WEAR
HEAVY LEATHER GLOVES WHEN HANDLING THE CUTTING UNIT.
DO NOT PLACE YOUR FINGERS BETWEEN THE KNIVES. THIS CAN RESULT IN SHEARING.
Summary of Contents for GARDEN TOOLS RD-SBM01
