12
www.raider.bg
1.3.3. Avoid the danger of incorporating the hammer drill inadvertently. Before you turn the
plug into the power supply network, make sure the trigger switch is in position “off”. If, when
you carry the hammer drill, keep your finger on the trigger switch, or if you submit a voltage of
the hammer drill, where it is included, there is the risk of accident.
1.3.4. Before you turn on the hammer drill, make sure that you have removed all of her
utilities and wrenches.
Utilities, forgotten rotating unit can cause injuries.
1.3.5. Avoid unnatural positions of the body. Work in a stable position of the body at any
time and keep the balance. So you can control the hammer drill better and safer if unexpected
situations arise.
1.3.6. Work with appropriate clothing. Do not operate with loose clothing or ornaments.
Keep your hair, clothes and gloves at a safe distance from rotating units of the hammer drill.
Robes, attire, long hair can be caught and carried away by chuck.
1.3.7. If possible use an external aspiration system, make sure it is switched on and
functioning properly. Use of the aspiration system reduces the risks due to the discharge dust
at work.
1.4. Hammer drill use and care.
1.4.1. Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
1.4.2. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
1.4.3. Before you modify the settings of the hammer drill, working to replace instruments
and ancillary devices, and for a long time when you will not use the hammer drill, unplug the
plug from the supply network. This measure eliminates the danger of triggering of the hammer
drill inadvertently.
1.4.4. Keep striking drill in places where they could not be reached by children. Do not let
it be used by persons who are not familiar with how to work with it and have not read those
instructions. When in the hands of inexperienced users, the hammer drill can be extremely
dangerous.
1.4.5. Keep your shock drill carefully. Check whether the mobile units operate impeccable,
whether it spells, if there is broken or damaged item which distort or alter the functions of the
hammer drill. Before using the hammer drill, make sure that the damaged parts to be repaired.
Many accidents are caused by poorly maintained power tools and appliances.
1.4.6. Keep your cutting tools well sharpened and always clean. Properly maintained cutting
tools with sharp edges have less resistance and working with them easier.
1.4.7. Use the hammer drill, attachment, working tools, etc., according to the manufacturer’s
instructions. In doing so must comply with specific operating conditions and operations to
perform. Using a drill striking than those provided by the manufacturer applications increases
the risk of accidents.
1.5. Hammer drill safety warnings.
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle. Loss of control can cause personal injury.
1.5.1. Do not use additional devices which are not recommended by the manufacturer for
this particular power. The fact that you can attach to specified device or machine working tool
does not ensure safe working with him.
1.5.2. Work with personal protective equipment. Work with face mask, eye protection or
goggles. If necessary, work with breathing mask, earmuffs (hearing protectors), work shoes
or special apron that protects you from work to dislodge small particles. Your eyes must be
protected from flying into the working area particles. Dust mask or a breathing filter dust arising
from work. If you are exposed for long periods of loud noise, this can lead to hearing loss.
1.5.3. If you perform activities which threaten to fall working tool of hidden wires under
tension or affect the power cord, hold power tool only electric insulated handles. When
entering the working tool in contact with the wires under tension, it is transmitted through the
metal details of the hammer drill and this may lead to electric shock.
