16
www.raider.bg
When the button is locked (2), the trip switch cannot be activated.
When the button is in the unlock position (3), the start switch can be activated.
CAUTION: When not working with the tool, always place the anti-switch button in the locked position.
1.
Lock button
2. Lock 3. Unlock
Switch on the work lamp
Press the start switch to turn on the lamp. The lamp remains lit while the start switch is pressed. The lamp
automatically turns off approximately 10 seconds after the trigger is released. circuit breaker
4. Operating tips: Insert the fastener into the square insert insert beforehand, then press the button to
prevent unintentional start-up and switch on the machine’s start switch.
Make sure the insert is firmly attached to the square tip (1) to make sure it does not slip out during use. The
torque depends on the duration of the impact. Maximum torque is reached after 6-10 seconds. The actual
torque achieved must always be checked with a torque wrench.
Environmental protection.
1. In order to protect the environment, the power tool and its packaging must be properly recycled for
the reuse of the raw materials contained therein. Do not dispose of power tools with household waste!
According to the Directive of the European Union 2012/19 / EC on end-of-life electrical and electronic
devices and the approval and as a national law, power tools that can no longer be used must be collected
separately and subjected to appropriate processing to utilize the are in them valuable raw materials.
