16
www.raider.bg
Robes, attire, long hair can be caught and carried away by rotating units.
3.7. If it is possible to use external aspiration system, make sure it is switched on
and functioning properly. Use of the aspiration system reduces the risks due to the
discharge dust at work.
4. Thoroughly respect to angle grinders.
4.1. Do not overload grinders. Use angle grinders only as intended. You will operate
better and safer when using the right angle grinder manufacturer in the specified
range of load.
4.2. Do not use the angle grinder with a starting switch is damaged.
Angle grinder, which can not be excluded and included as intended by the
manufacturer, is dangerous and should be repaired.
4.3. Before you modify the settings of the angle grinder to replace work tools and
additional accessories as well as a long time when you will not use grinders, unplug the
plug from the supply network. This measure eliminates the danger of triggering the
grinding inadvertently.
4.4. Keep grinding in places where they can be reached by children. Do not allow
them to be used by persons who are not familiar with how to work with them and
have not read those instructions. When you are in the hands of inexperienced users,
grinders can be extremely dangerous.
4.5. Keep grinding their care. Check whether the mobile units operate impeccable,
whether it spells, if there is a broken or damaged item which distort or alter the
functions of the grinding machine. Before using the angle grinder, make sure that the
damaged parts to be repaired. Many accidents are caused by poorly maintained power
tools and appliances.
4.6. Use the angle grinder, attachment, working tools according to the manufacturer’s
instructions. In doing so must comply with specific operating conditions and operations
to perform. Using grinders of various applications provided by the manufacturer
increases the risk of accidents.
5. Maintain.
5.1. Repairing your electric tools is best carried out only by qualified specialists in
workshops RAIDER, which used only original spare parts. Thus it ensuring their safe
operation.
6. Guidelines for the safe handling, specific grinding purchased by you. General
guidelines for safe operation with a disc grinder and sandpaper, clean with wire brush
and abrasive cutting disk.
6.1. This grinding can be used for grinding with carboflex drive and sandpaper,
clean with wire brush, polishing and cutting carboflex disk. Follow all instructions and
warnings complying with technical parameters and the adjusted images. Failure to
follow the following instructions, the consequences may be an electric shock, fire and
/ or severe injuries.
6.2. This angle grinder is not suitable for polishing. Carrying out activities for which
the grinding is not intended, may be dangerous and cause injuries.
6.3. Do not use additional devices which are not recommended by the manufacturer
for this particular power. The fact that you can attach to specified device or machine
working tool does not ensure safe working with him.
6.4. Allowable speed of rotation of the working tools must be at least equal to the
inscribed plaque on the grinding speed of rotation. Working tools that rotate at a
higher speed than the maximum indicated on the angle grinder can break and pieces
of them high speed.
6.5. The outer diameter and thickness of the working tools must comply with the
particulars specified in the technical characteristics of your angle grinder. Working
tools with inappropriate size may not be shielded as necessary or can be controlled
well enough.
