12
www.raider.bg
10. ENVIRONMENTAL PROTECTION.
In order to protect the environment, the machinery, accessories and packaging must undergo appropriate treatment for the
re-use of the raw materials contained therein. To relieve recycling, parts made of artificial materials are appropriately labeled. Do
not throw away machinery at household waste! Under Directive 2012/19 / EC on end-of-life electrical and electronic equipment
and the validation and as a national law, machinery that can no longer be used must be separately collected and subjected to
an appropriate processing
to recover the valuable secondary raw materials contained therein.
DISADVANTAGES AND WAYS OF REMOVING THEM
Problem
Possible reason
Remedy
Machine does not start:
1.1 The power is interrupted
1.2 The power cord or plug is
defective
1.3 Another electrical defect of
the power tool
1. Check the power supply by
connecting another power tool
2. Qualified person to check
the tool
3. Qualified person to check
the tool
The power tool does not work
at full power
2.1 The extension cord is too
long and / or the cross-section
is too small
2.2 The supply voltage (eg
generator) is too low
1. Use an extension cord with
a permissible
length and / or suitable cross-
section
2. Connect the power tool to a
suitable power supply
Bad work results
3.1 Exported consumables
3.2 Worn grinding head
1. Replace it
2. For replacement
Significant dust formation
4.1 Worn edge of disk
4.2 Dust is not on / on
1. Replace
2. Connect / plug in the
vacuum cleaner
