12
www.raider.bg
tool only for the insulated gripping. Upon entering the tool in contact with live wires it metal parts
of battery shrub shears and this could lead to electric shock.
1.5.4. Use proper utensils to find any hidden beneath the surface pipelines, or contact the
local utility company. Entering into contact with live wires can cause fire and electric shock.
The damage to the pipeline could lead to an explosion. Penetrating a water line causes property
damage or may cause an electric shock.
1.5.5. Keep stable machine.
1.5.6. Clean vents of your cordless shrub shear.
1.5.7. Use only recommended battery and charger.
1.5.8. The battery should always be kept away from heat sources. Do not leave it for a long time
in an environment with high temperature (of the sun places near heaters or where the temperature
exceeds 50 ° C).
1.5.9. The charging time the battery should not exceed 3.5 hours, otherwise it may be damaged.
1.5.10. Avoid charging the battery at temperatures below 0 ° C.
1.5.11. The charger is designed to work with her. It should not be used for other purposes.
1.5.12. Do not place, any metal objects into the charger.
1.5.13. The battery must be recharged when it fails to produce enough power to operate. Do not
continue to use the scissors under these conditions. Follow the loading procedure. You can also
charge the battery partially used when you wish, without adverse effect on battery ..
1.5.14. To clean the battery shrub shears use a soft, dry cloth. Never use any solvent or alcohol.
1.5.15. Before cleaning the charger, disconnect it from the network.
1.5.16. If you are charging the batteries one after another between charges make breaks of 30
minutes.
1.6. Special safety conditions at work with the charger.
Before proceeding to work with the charger must read all related to him and contained in this
instruction information and indications on the charger and battery, for which it is intended.
1.6.1. To reduce the risk of injuries and injuries charger should only be used to charge the
batteries of nickel-cadmium type. The batteries of another type may explode, causing serious
injuries or property damage.
1.6.2. The charger should not be exposed to the influence of moisture or water.
1.6.3. The use of attachment not recommended or sold items from the charger manufacturer
jeopardized by fire, causing injury or electric shock.
1.6.4. The power cord should not be walked on. It should not be located in the passage where
people pass and should not be subjected to any other danger (eg too much tension).
1.6.5. If not necessary, do not use extension cord. Using an improper extension cord may
cause fire or electric shock. If using an extension cord is necessary, first make sure whether the
contact of the extension corresponds to the pins on the original connector, power charger.
1.6.6. The extension must be in good working order.
1.6.7. Not for use charger with a damaged cord or plug. The damage must be repaired by a
qualified person.
1.6.8. Not allowed to use the charger if it has been subjected to a strong impact, fall or has been
damaged otherwise. Inspection and possible repair should be entrusted to an authorized service
RAIDER.
1.6.9. Do not allow attempts to disassemble the charger. All repairs must be entrusted to
authorized service RAIDER. Improper installation of the charger threatening electric shock or fire.
1.6.10. Before conducting any scheduled maintenance or cleaning the charger, it should be
unplugged.
1.6.11. The charger can be excluded from the mains when not in use!
2. Functional description and purpose.
Battery shears for grass and shrubs is a handheld power tool powered by a battery. It is
designed for cutting and shaping of grass and shrubs at home. Not for use of battery shrub shears
for activities other than its intended use.
Not for use of the machine for activities other than its intended purpose!
3. Change the cutting head.
