67
“RAIDER” power tools are designed and manufactured in accordance with the regulations and
standards for compliance with all safety requirements.
Content and scope of the commercial guarantee.
WARRANTY CONDITIONS
The warranty period is:
- For domestic use (private) - 24 months.
- For professional use (for companies) - 12 months.
User is entitled to free repair service in insured warranty period if the warranty card is filled properly
made with signature and dealer’s stamp, sold the instrument signed by the client that is aware of the
warranty conditions and fiscal cash register receipt or invoice showing the date of purchase.
Repairs are accepted only cleaned machines!
Appliances should only be used appropriately and in accordance with the instructions.
To ensure safe operation is required the customer to be familiar with instructions for use of power
tool safety rules when working with it and its particular purpose. The unit requires periodic cleaning
and proper maintenance.
Warranty does not cover:
- Wear of colored coating of tools;
- Parts and consumables, which are subject to wear caused by use such as: grease, oil, brushes,
guides, rollers, pads, drive belts, flexible wire shaft, bearings, seals, piston with a hammer tackers,
etc.;
- Accessories and supplies such as: handles, nose, batteries, cases, chargers, drills, cutting discs,
chisel knives, chains, sandpaper, stops, polishing discs, chucks (grip, holder of the cutting tool) to
cord reel itself cord for lawn mowers, etc.;
- Fusible fuses and bulbs;
- Mechanical damage to the hull and all external components of the device, including ornamental;
- Fuses eye fuses cutting tools, rubber plates, frames, rulers, etc.;
- Cord and plug;
- Overall damage to instruments caused by natural disasters such as fires, floods, earthquakes, etc.;
The warranty is not valid in cases where:
- Inconsistent serial number of this article with a completed warranty card;
- The label is removed or completely missing one;
- Is attempting to unauthorized interference with unauthorized service base camp;
- Damage caused due to misuse (non instructions) of the device by the customer;
- Damage caused due to careless handling of the device;
- Damage to rotor or stator, consisting of the bonding between them, due to melting of insulation
caused by the continuous overload;
- Damage to rotor or stator caused by overload or impaired ventilation, expressed in the change of
the collector or windings;
- No protective disks, support panels or other components that are part of the structure of the
instrument and are intended to ensure its safe and proper operation;
- The cord of the instrument is extended or replaced by the customer;
- Damage caused by overload or lack of ventilation and insufficient lubrication of moving
components;
- Wear and tear bearings or blocked due to overloading, or powder;
- Broken bearing collar;
- Breach the integrity of the teeth of gears (broken, worn);
- Broken spline or bolting;
- Failure On/Off switch or electronic control caused by dust or breakage;
- Broken gear box (head) caused by the lock mechanism;
- Occurrence of abnormal clearance between piston and cylinder as a result of overloading or dust;
- Tightening between piston and cylinder as a result of overloading or dust;
- Damaged centrifugal wheel and brake (discolored) - due to work by a blocked brake;
The deadline for a renovated adopted in electric service is within a month.
Workshops are not responsible for the instruments are not contacted by the owners one month after
the statutory period for repair!
Summary of Contents for RD-HD04
Page 49: ...49 EXPLODED VIEW OF RD HD04 ...
Page 64: ...64 www raider bg ...
Page 68: ...68 www raider bg ...
