10
www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the occurrence of an accident.
1.2. Do not operate in an environment where the impact drill with an increased risk of an explosion in the vicinity of flammable
liquids, gases or powders.
During operation of the impact drill can be separated sparks that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe distance while working with the impact drill.
If your attention is diverted, you may lose control over the impact drill.
2. Safety when working with electricity.
2.1. Plug of the impact drill must be suitable for contact. In no case is allowed to modify the structure of the plug. When working
with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
2.2. Avoid touching your body to earthed bodies, eg. pipes, heaters, stoves and refrigerators. When your body is grounded, risk
of electric shock is greater.
Protect your impact drill from rain and moisture.
Penetration of water into the impact drill increases the risk of electric shock.
2.3. Do not use a power cord for the purposes for which it is not provided, eg. to bear the impact drill for cable or removing the plug
from the outlet. Protect cords from heat, oil, contact with sharp edges or points of mobile machines.
Damaged or twisted cables increase the risk of electric shock.
2.4. When working with drill impact out, switch the machine only in installations equipped with electric switch Fi (safety shut-off
switch with Residual protection), and current leakage, which is triggered when DTZ must be no more than 30 mA, according to
“Regulation 3 device for the electrical equipment and power lines. Use only extension, suitable for outdoor use. Using the extension,
designed for outdoor use reduces the risk of electric shock.
2.5. If you require the use of the impact drill and in moist environment, plug the machine only in installations equipped with electric
switch Fi. Use of such a safety switch utechni currents reduces the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the impact drill, when you are tired
or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work impact drill may have the effect of extremely serious injuries.
3.2. Work with protective work clothing and always with safety glasses.
Wearing suitable for drilling and the activities of personal protective equipment, such as respiratory masks, healthy, tightly closed
shoes grapple with a stable, protective helmet and silencers (hearing protectors), reduces the risk of accident.
3.3. Avoid the danger of incorporating the impact drill inadvertently. Before you turn the plug into the power supply network, make
sure the trigger switch is in position “off”. If, when you carry the impact drill, keep your finger on the trigger switch, or if you submit a
voltage of the impact drill, where it is included, there is the risk of accident.
3.4. Before you turn on the impact drill, make sure that you have removed all of her utilities and wrenches.
Utilities, forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep the balance. So you can
control the impact drill better and safer if unexpected situations arise.
3.6. Work with appropriate clothing. Do not operate with loose clothing or ornaments. Keep your hair, clothes and gloves at a safe
distance from rotating units of the impact drill. Robes, attire, long hair can be caught and carried away by chuck.
3.7. If possible use an external aspiration system, make sure it is switched on and functioning properly. Use of the aspiration
system reduces the risks due to the discharge dust at work.
4. Care to drill to hit.
4.1. Do not overload the impact drill. Use only the impact drill in accordance with its intended purpose. Will operate better and safer
when using the appropriate impact drill manufacturer in the specified range of load.
4.2. Do not use impact drill, whose starting switch is damaged.
Impact drill, which can not be excluded and included as provided by the manufacturer, is dangerous and must be repaired.
4.3. Before you modify the settings of the impact drill, working to replace instruments and ancillary devices, and for a long time
when you will not use the impact drill, unplug the plug from the supply network. This measure eliminates the danger of triggering of
the impact drill inadvertently.
4.4. Keep impact drill in places where they could not be reached by children. Do not let it be used by persons who are not familiar
Summary of Contents for RD-ID40
Page 90: ...90 www raider bg ...
Page 93: ......
