15
Easy and fast adjustment of the desired cutting height.
Adjusts the height of the front axle and the rear axle in one go. All four wheels must always be at
the same height. To do this, the front and rear axles must be adjusted in the corresponding housing
channel at the same height. When the wheel axle is moved in the channel closest to the ground (the
lowest channel), the mower will mow the grass to a maximum height of 70 mm. When moving the
axis in the middle channel, the grass will be cut to a height of 50 mm, and when moving to the top
channel, the mowing will be at the lowest height of 30 mm. For the first mowing of the season, it is
advisable to adjust the mower to the highest height.
3.4. Check if the bolt that holds the blade is tight. Head bolt for spanner 27 mm, and the bolt itself
has a diameter of 8 mm and a right hand thread with step 1,25 mm. The length of the thread is 30
mm The bolt is screwed to the right and to the left has been unscrewed. To unscrew or tighten the
bolt catch with glove the cutting blade to block the rotating of the shaft. Do not insert a screwdriver
or other metal object into the vent hole to block the rotation of the shaft. This will break the cooling
turbine.
3.5. Firmly attached the extension cable for the device, then plug the extension cord plug to
plug. Make sure the extension cord is away from the blade of the mower and the area to mow. Then
plug the other end of the extension in the sockets 230 V. Machines with rated supply voltage 230 V
can work included in the electric supply 230 V.
3.6. Turn on the electric lawn mower by pressing the safety button against inadvertent switching
on and push the lever on the switch to the handle. Submit safety button. Never operate the mower
if it is in the high grass.
3.7. Switching off the electric lawn mower by release the lever of the On/Off switch and
necessarily wait for the cutting blade to stop rotating!
Do not switch the mower immediately after you turn it off.
4. Practical tips:
4.1. Follow local regulations for the time of day during which you can use machines outdoors.
In some countries prohibit mowing morning before 08.00 hours, in the afternoon between 2:00 p.m.
to 16:00 hours and after 22:00 at night, to protect citizens from unwanted noise.
4.2. Often lawns are composed of grasses of different varieties. With frequent mowing you will
boost the growth of those species, which form dense sward and strong roots. If you mow your lawn
frequently will strengthen and improve the development of high - growing grasses and weeds. The
normal height of the grass is about 4-5 cm. Better to plan the frequency of mowing a lawn that can
reduce up to 1/3 of the total height of the grass. If you do not irrigate your lawn, mow grass lower
than 4 cm, since a potential drought it will degenerate.
4.3. Mow the lowest height (30 mm) only if your lawn area is very flat, expect heavy rains or will
leave on vacation.
4.4. The average height of mowing (50 mm) is best when the interval between the previous and
the next mowing are not lengthy.
4.5. Cutting height (70 mm) is suitable for the first mowing of the season and when there is a
drought.
4.6. Empty the container for collecting grass clippings after filling 2/3 of its volume, this will
provide a more efficient mowing and prevent the mower from overloading.
4.7. When working in very difficult conditions not to overload the motor. When reloading the
rotational speed of the motor drops and noise is changed. In this case, stop, release the lever to
include and set higher mowing height. Otherwise, performance will be reduced and the machine
may be damaged.
Summary of Contents for RD-LM31
Page 99: ...99 EXPLODED VIEW AND SPARE PARTS LIST ...
Page 116: ...116 www raider bg ...
Page 120: ...120 www raider bg ...
Page 121: ...121 ...
