82
www.raider.bg
La tabla a continuación muestra los síntomas de falla y cómo puede ayudar, si su
cortacésped deja de funcionar normalmente. Si no puede encontrar y solucionar el problema
siguiendo las instrucciones de la tabla, comuníquese con su servicio autorizado Raider.
Atención: antes de comenzar a solucionar problemas, detenga el cortacésped y desconéctelo
Faults
Removal
Reasons
Mower does not
start to work
Power cable is not connected or damaged Check cable. If necessary,
replace it.
The engine start
but the knife does
not rotate.
Mower is in a tall grass.
Upon initial release always put
the mower in the grass
It is possible that the mower is fuzzy and
the blade is blocked.
Disconnect the plug and
check it. Put on your
protective gloves and clean
the knife and release
Engine is turned off
suddenly.
The power plug is withdrawn
Check cable. Make sure it is
well enshrined in the device
(14) and plug it again.
Unusual noise.
Bolt of the blade is loose or connections
between fasteners.
Fasten the parts.
Strong vibrations.
Distorted and damaged knife.
Immediately stop the mower
and replace the knife in a
specialized service.
Unequal mowing.
Engine work
hard and reduce
turnovers.
The grass is very high.
Increase mowing height.
The blade is blunt.
Replace or tipped knife. See
5.2.
It is possible that the mower is fuzzy and
blocked
Look underneath the mower
and clean it. Work always with
protective gloves.
The blade can be installed incorrectly.
Check. See 5.2
The grass remains
on the ground and
the basket (6) is not
collecting it
The grass is very moist.
Wait for grass areas to dry
Outlet is clogged
Disconnect the plug and
clean it.
Grass baskets full
Disconnect the plug and
empty the basket
Basket grass is contaminated.
Switch off the power plug from
the mains electricity. Cleaning
the basket. Baskets should
always to be clean to allow air
to pass freely through it.
If necessary, repair your mower is best carried out only by qualified experts in workshops
on RAIDER, which used only original spare parts. Thus ensuring their safe operation.
7.Protection of the environment.
For the environmental protection of the power tool, the electrical appliances and
packaging must undergo appropriate processing for the re-use of the valuable raw
materials contained therein. Do not dispose of power tools in household waste!
According to EU Directive 2012/19 / EC on end-of-life electrical and electronic
devices and the validation and as a national law, power tools that can no longer
be used must be separately collected and subjected to appropriate processing for
the recovery of the contents making them valuable raw materials.
Summary of Contents for RD-LM31
Page 99: ...99 EXPLODED VIEW AND SPARE PARTS LIST ...
Page 116: ...116 www raider bg ...
Page 120: ...120 www raider bg ...
Page 121: ...121 ...