11
1.4.2. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
1.4.3. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
1.4.4. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
1.4.5. Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
1.4.6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
1.4.7. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
2. ASSEMBLING
• For your safety, please use auxiliary handle
• The collar flange of the auxiliary ring-locking handle should properly fit into the groove
of the head cover
• Auxiliary ring-locking handle can be installed in both directions screw, lever for hexagon
srew
• When mounting or remove the polish wheel, press self-locking button, return to the
original position after mounting the polishing wheel
• When the woolen wheel must be concentric alighment with the polishing weel
• Adjust stepless speed regulator from 600rpm to 3000rpm according to reguirment, it is the
highest speed in the “6” position,
• gradually slow down, lowest in the “1” position
1
2
3
4
5
6
300
600
1200
1800
2400
3000
• The perfect working angle for the machine. It is the best working angle when the woolen
wheel is 15to the working part
3. PROPER USE
The machine is designed for polishing coated surfaces and for sanding wood, iron, plastic
and similar materials using the appropriate abrasive paper.
The machine is to be used only for its prescribed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the machine is used in commercial, trade
or industrial businesses or for equivalent purposes.
IMPORTANT!
To prevent damage to the surfaces of the workpieces you wish to polish, make sure that
you observe the following instructions:
Make sure that the polishing attachment is always mounted precisely in the center of the
