7
Original Instructions’ Manual
Dear Customer,
Congratulations on the purchase of appliance from the fastest growing brand of electric and
pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable
machines and work with them will deliver a real pleasure. For your convenience has been built and
excellent service network of 45 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and accidents,
it is important that these instructions will remain available for future reference to all who will use the
appliance. If you sell it to a new owner “Instructions for Use” must be submitted along with it to enable
new users to become familiar with relevant safety and operating instructions.
RAIDER exclusive representative of a company EUROMASTER Import Export Ltd., Sofia
1231, “Lomsko shosse 246, tel 02 934 33 33, 934 10 10, www.raider.bg; www.euromasterbg.com; e
-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008
with scope of certification: Trade, import, export and servicing of hobby and professional electrical,
mechanical and pneumatic tools and general hardware. The certificate was issued by Moody
International Certification Ltd, England.
Technical data
parameter
unit
value
Model
-
RD-RT01
Mains voltage
V
220-240
Frequency
Hz
50
Table size
mm
335 x 450
Table size with width extension
mm
335 x 860
Table height
mm
280
Max. cutter Ø
mm
39
When using equipment, a few safety precautions must be observed to avoid injuries and damage.
Please read the complete operating manual with due care. Retain this manual in a safe place, so that
the information is available at all times. If you give the equipment to any other person, hand over these
operating instructions as well.
We accept no liability for damage or accidents which arise due to non-observance of these instructions
and the safety information.
1. Scope of use
The router table is designed for stationary jobs with a suitable router. Please observe the following
information and the information supplied by the manufacturer of the router.
2.Safety information
Important! The following basic safety action measures to be taken when using electric tools to protect
the user from electric shocks and the risk of injury and fire.
Read all the following information before you use this electric tool and keep these safety instructions
in a safe place.
- For your own safety, read and observe this safety information for the router table and the information
supplied by the manufacturer of the router.
- The router table must always be securely fastened to a workbench in a horizontal position.
- Keep your workplace clean and well illuminated.
- Avoid abnormal working postures. Make sure you stand squarely and keep your balance at all times.
EN
Summary of Contents for RD-RT01
Page 2: ...2 www raider bg ...
Page 46: ...46 www raider bg ...
Page 48: ...48 www raider bg ...
Page 59: ...59 ...
